Linx 1010 10.1-Inch Tablet - Black (Intel Atom Z3735F 1.33 GHz, 2 GB RAM, 32 GB Storage, WLAN, Bluetooth, Camera, Windows 10) (Renewed)

Product Information

The super-low profile connector has been developed to open up a world of new options that let you take your tablet further. I have transferred your files inside and now on boot I get the grub rescue file /boot/grub/i386-efi/normal. I thought I’d give it a try without doing that fix and ended up ripping out pulse and replacing it with pipewire but this has its own problems (sort of stuttering playback in chrome). Back in around 2015 when first trying to get Linux installed on the tablet, the chroot approach above did not work.

You will need to tailor it a bit - instead of /dev/sda1 and /dev/sda3 you will need to use the partitions the installer created on your tablet’s internal storage, which should be /dev/mmcblk1p1 and /dev/mmcblk1p2 respectively. after several attempts I found your page, it worked like a charm and I could open Ubuntu on my tablet. Part of it is baked into the board firmware in the same way as BIOS, but an EFI partition is also required on disk, along with GPT replacing the older disk MBR. Steve… Double check you’re using the right device names for your tablet (/dev/mmcblkXpX) it can potentially differ.g. if it offers to download updates during the install, or install non-free drivers, have you tried changing these to the non-default choice? cfg file that is on the partition that the ubuntu is installed and not on the efi partition so I need to perform the sudo update-grub and tell it to update the efi folder. I have tested Fedora’s KDE “spin” and can confirm it sets up KDE just fine, so if that’s your preference, use the Fedora KDE spin image from the start.

The Leather Edition tag comes from the inclusion of a faux level back to the tablet which adds a stylish touch, and don’t forget Window 10 is included as standard. Just finishing up a few install issues and I'll see what can be done regarding the backed up recovery partition. as i said i can lock the screen just fine but id like to see if theres a way to fix the orientation .If anyone else wants to try this, I used a 3 USB2 + power to micro USB adapter like this one https://www. Play around in the setup menu until you find the option to disable Secure Boot, then press F10 on the keyboard to save, and repeat this step.

When I try to shut it down, either by shutdown -h now or via the GUI it will go through the whole process, the screen will turn off, but then about 5 seconds later it will start up again. After all was setup I first used scripts to make the screen rotate and the touch screen providing the correct position. Anyway, i have the onboard wifi working, i will have to check what i've done when i get home, but so far i have wifi working, havent checked Bluetooth yet, but with the driver i have, i'm sure it is. Hello Ian, I chose to erase disk and install the ubuntu on the installation but after everything is complete when I turn on the linx 1010 i get that blue screen from windows saying Recovery —- Your PC/Device needs to be repaired. You can also get more information using xinput list in Xorg or libinput list-devices (from the libinput-tools package) in Wayland.

Then I broke my /etc/fstab, and it won’t boot (it says “minimal bash-like line editing is supported”). However when I run the Disks utility it is showing my internal memory as an SD Card Reader; if I look at the Model I get MMC 032GE4 (sd/mmc). Now both touch screen and accelerometer screen autorotation work but the portrait modes are upside down.